~ View Color Options
Please remember that actual colors are likely to vary from the display, and not all colors are available In all sizes and finishes.

We fabricate these panels in our factory with automated laminating equipment. Heated adhesive is applied to each surface by a four-gun reciprocal spray system in the exact thickness required, accomplishing positive, even coverage. Lamination is performed by a 100 pound-per-square-inch rotary pinch roller to provide a high strength bond.

The various types of materials available can be fabricated in whatever combination and thickness needed to make up insulated panels (from 5/8" to 4" in thickness) or 1/4" veneer panels.

Finishes
We stock the following types of finishes for both single-face and double-face panels. Other metal thicknesses are also available:

~ Coil-coated Kynar on .032 or .040 aluminum
~ Coil-coated Kynar on 26 gauge. steel
~ Bronze or White Polyester on .022 aluminum
~ Clear and Bronze Anodized on .032 aluminum

Substrates
Substrates for insulated panels include tempered hardboard, cement board, corrugated plastic, hard plastic, or fire-rated gypsum (1/2" or 5/8") and for 1/4" veneer panels either tempered hardboard or cement board.

Insulation
The various types of rigid insulation available are polyisocyanurate, polystyrene, or fesco board. Polyisocyanurate (Iso) has the highest R-value but is the most expensive, polystyrene is the least expensive, and fesco is used when an incombustible insulation is required.

Back Sheets
The panel back sheet can be any one of the face sheet finishes, or if single face, .010 mill finish aluminum, 24 gauge Galvaneel (paintable), or .022 paintable aluminum.

Thicknesses
We can make panels from 3/16" to over 4" thick.

Panel Sizes
Panels are made to your exact field dimensions at no extra charge.

Accessories
Touch-up Paint and moldings for 1/4" panels.

Pricing
Due to the number of variables, each job must be individually priced. Contact us to provide your sizes and quantities and we will get back to you immediately with prices.

Delivery
We try to maintain a lead-time for small orders of two weeks or less, sooner if needed. We deliver all New England orders in our own trucks, and use contract and common carriers for our national customers.