We produce a variety of
Ceramicsteel panels in our Jaffrey
factory with automated laminating
equipment. Heated adhesive is
applied to each surface by a
four-gun reciprocal spray system in
the exact thickness required
accomplishing positive, even
coverage. Lamination is performed by
a 100 pound-per-square-inch rotary
pinch roller to provide a
high-strength bond.
~ View Color Charts
Ceramicsteel
Interior and Exterior color charts
Ceramicsteel
Writing Surface color charts
What is the differences
between porcelain-on-steel and
porcelain-on-aluminum panels?
In 1992, Alliance
(now Polyvision) discontinued
furnishing porcelain-faced
panels to the glazing and window
markets, and instead decided to
concentrate on marketing
Porcelain-on-Steel coil to a
selected group of Approved Panel
Laminators (APLs). High Standard
is an APL. The porcelain coating
on steel is thicker than
porcelain on aluminum. This,
together with a higher firing
temperature and the steel
substrate, results in a surface
hardness that is more than 50%
harder than porcelain on
aluminum.
Contact us for more information
or if you would like a complete
presentation of the advantages
and benefits of porcelain on
steel.
FINISHES & COLORS:
We stock Ceramicsteel in both
semi-gloss and semi-matte
finishes in a wide variety of
colors. Custom or special colors
are readily available in minimum
orders of 1,000 square feet.
View Color Charts:
Ceramicsteel
Interior and Exterior color charts
Ceramicsteel
Writing Surface color charts
SUBSTRATES:
Substrates for insulated panels
include tempered hardboard,
cement board, plastic, or
fire-rated gypsum (1/2" or 5/8"),
and for 1/4" veneer panels,
either tempered hardboard or
cement board.
INSULATION:
The various types of rigid
insulation available are
polisocyanurate, polystyrene, or
fesco board.
BACK SHEETS:
The back sheet can be
Ceramicsteel or any one of our
other finishes, .010 mill finish
aluminum, 24 gauge Galvaneel
(paintable), or .022 paintable
aluminum.
THICKNESSES:
We can make panels from 3/16" to
4" thick.
PANEL SIZES:
Panels are made to your exact
field dimensions at no extra
charge.
ACCESSORIES:
Touch-up paint and moldings for
1/4" panels.
PRICING:
Due to variables of size,
finish, color, substrates,
insulation, and the like, each
job must be individually priced.
Call, fax, or e-mail us your
sizes and quantities and we will
get back to you immediately with
prices.
DELIVERY:
We try to maintain a lead-time
of two weeks or less for small
orders, sooner if necessary. We
deliver all New England orders
in our own trucks, and use
contract and common carriers for
our national customer orders.
