Philosophy

High Standard is a full service panel laminator focused on meeting the unique needs of all our customers.
No order is too small.
Our goal is to provide good service on small orders so that you will call High Standard for the big ones.

Jaffrey

High Standard produced laminated metal panels in our Dublin, NH plant since the mid-1970s. In 2004 we relocated to a larger facility in nearby Jaffrey, where we produce a wide range of metal panels:

Alliance Ceramicsteel exterior panels.
Alliance Ceramicsteel P³ writing surfaces.
Coil-coated Kynar finished aluminum or 24 gauge steel panels utilizing the standard colors of several suppliers.
Clear or bronze anodized aluminum panels.
Citadel Panel 15 and Glazeguard textured panels with a painted finish.

Configurations

Numerous configurations, substrates, and cores are available:

Panels may be finished either one side (single faced) or both sides (double faced).
Combinations of materials may be specified.
- Example: Ceramicsteel on one side, Kynar on aluminum on the other.
Panels can be made in any thickness up to approximately 4 inches.
- Veneer panels are normally 1/4" in thickness utilizing tempered hardboard or cement board as a single substrate.
- Insulated panels range from 9/16" to 4" in thickness with hardboard, cement board, or plastic substrates. Insulation may be expanded polystyrene, polyisocyanurate, or fesco board.

Fabrication

Most orders are produced cut-to-size after field dimensions are provided. This eliminates field cutting and in most cases is more cost effective than ordering stock sizes.

Inventory

High Standard maintains an inventory of standard molding shapes for 1/4" panels available in either clear anodized or painted to match the panel color. Our extensive in-house inventory of Ceramicsteel, Kynar, and anodized finished metals enables us to provide rapid service for virtually any small order or to ship a partial for a larger project.